Powerhouse Pergola
A post and beam solar carport at night in a storm
Home / Before the Storm / Any season

What plugs into the battery, and what plugs into the generator

Two portable machines, one house. Here is how to tie them together so nothing cuts out when the generator shuts off.

Illustration

In short: Small things that run all the time go on the battery and stay there. Things that need a hard kick to start, or run only now and then, go on the generator while it is running.

By Bret, founder of Powerhouse Pergola, on the Outer Banks of North Carolina

By battery we mean a portable power station, the box often sold as a “solar generator.”

On the battery, always

A few lights, the phone chargers and the internet, which means both boxes: the modem and the router. These are small, steady loads, and they are the ones you don’t want cutting out when the generator shuts off. Left on the battery, they never notice.

On the generator, only while it runs

The refrigerator and freezer. A refrigerator motor needs a hard kick to start, about 1,200 watts by Honda’s figures, against under 200 to keep running. That is easy for a generator and hard on a battery. With frozen water bottles inside, it coasts between runs.

The short, heavy things, one at a time. The microwave. The coffee maker.

The battery’s own charging cord.

Wired in and tested: the furnace

The gas furnace is in a group by itself. It has no plug, so it can’t simply go on the battery, and some furnaces won’t stay lit on a battery or a small generator. How it gets connected is an electrician’s call, and it has to be proven on a calm day. Once it is, the battery is the place for it, because it is a small steady load you want running all night. The details are in test it before the storm.

How the cords go

One heavy cord runs from the generator outside to a spot indoors. The refrigerator and the battery’s charger plug into that. Everything in the first group plugs into the battery.

Start the generator with nothing on it, let it settle, then bring on the refrigerator, then the charger. When the battery is full and the refrigerator is cold, shut the generator off. Nothing in the house changes.

Why not plug everything into the battery?

Most power stations can charge and run things at the same time. The manual calls it pass-through or EPS. But everything then squeezes through the battery’s charging plug, which has a ceiling: 1,800 watts on the unit we use as an example. A refrigerator starting on top of a full-speed charge can go over it. Heavy loads are better straight on the generator.

Two settings that matter

Turn the battery’s charge rate down so the generator has room for the refrigerator too. On our example unit it can be set anywhere from 200 to 1,800 watts.

And the generator should be rated higher than the battery’s top charge rate. The battery’s maker says so in its own spec sheet.

One thing to do today

Make two short lists on one page: what goes on the battery, and what goes on the generator. Tape it where the cords are kept.

The numbers

WhatFigure
Refrigerator/freezer, running132 to 192 watts
Refrigerator/freezer, starting1,200 watts
Example power station, top charge rate1,800 watts
Same unit, adjustable charge rate200 to 1,800 watts

For reporters

Quote this piece freely. All we ask is a link back to this page. To reach us, use the form at Join the waitlist.

Sources

More from Before the Storm →

Tell us about your place

Say what you want to build, or what you want to keep running when the power is out. We’ll tell you straight what it would take.