A pergola with a roof, drawn to scale before you build it
This is a free 3D design tool for a heavy timber pergola. Strictly, a pergola has an open slatted top. This one carries a solid roof of solar panels, which is what most people looking for a pergola with a roof are after: shade, rain cover and power from the same structure. Pick a starting design, then change it: the roof shape and pitch, how many panels long and deep, the height under the beams, the number of bays, the post, beam and rafter sizes, and the knee braces.
What it tells you
- Sizes to scale. Roof length and width, ridge and eave heights, headroom, the widest open bay and the lowest point at the knee braces, all in feet and inches.
- The roof is built around the panels. The frame is sized to standard solar panel sizes, so the panels land on the rafters and the edges come out even.
- A lumberyard list from standard lengths. Every piece is cut from stock sold in 2-foot steps, and the tool shows how much is left over. Long beams break over a post, never out in the span.
- What it looks like in your yard. Move the sun by hour and season, turn the front to face any direction, and look up through the panels from underneath.
- A picture and a one-page printout. Save the view as a picture, or print one page with the sizes and the lumberyard list to hand to a builder.
- Solar by month. The panel count, the rated size in kilowatts, and what the roof makes in a year and in each month. The figures change with the pitch and the way the roof faces. They come from PVWatts, the federal solar calculator, run for Charlotte, North Carolina at 14% system losses with no shade.
- A stone fireplace. Switch on a stone fireplace with a pizza oven across one end. On a gable roof it is built into the end of the frame, and the chimney rises through a notch in the roof at the ridge, drawn 3 feet above it. The two panels at the notch come out and metal flashing takes their place. Wood smoke can leave soot on the nearest panels, so plan on rinsing them, or burn gas. The tool draws the fireplace for size and looks. The footing, the flue and the clearances between fire and timber are for your mason, your engineer and your inspector.
- Whether it fits your yard. Type in your yard, side to side and front to back, and the tool draws it on the ground and tells you what is left over. Local zoning rules set how far a roof has to stay back from the property line, so leave room for that.
What happens after the picture
- Print the one-page sheet or copy the link to your design.
- A builder or a lumberyard can price the lumberyard list.
- An engineer checks the sizes, connections, footings and wind for your site and stamps the drawings.
- Your building department reviews the stamped drawings for the permit.
- It gets built.
What it does not do
It is a design tool, not engineering, and every number is an estimate. Timber sizes, connections, footings and wind loads have to be checked and stamped by an engineer for your site before anything is built.
The same tool, other starting points
Post and Beam Carport Designer · Solar Carport Designer · Pergola Carport Designer · Post and Beam Pavilion Designer · Post and Beam Gazebo Designer · Fireplace Pavilion Designer · Pool Cabana Designer
Design gallery: twelve designs to open and change
Post and beam carports · Post and beam pool houses · Kits and stamped plans · Ready to permit · Backup power calculator